Full Solutions to Fix iPad Won't Turn On

Sometimes, although rarely, your iPad won’t turn on or just get stuck. But you don’t have to panic. Typically, the iPad is in a "suspend mode", that is, it wants you to press the home button or the sleep/wake button to reactivate it. However, it may also be possible that the iPad is completely ran down, which means you would have a problem like saying my iPad won’t turn on even when plugged in.

In this article, we shall study the most common reasons why my iPad won’t turn on and the ways by which you can tackle the problem. We strictly recommend that you should try them one by one at a time, in the same order they appear in this article. Shall we go ahead?

Part 1: Common reasons for iPad won’t turn on

There are many reasons why iPad won’t turn on or does not switch on. Let’s see the major ones one by one:

1. Completely Exhausted Battery: It is indeed the mostly occurred issue that users use to face after they have installed an update. Actually, mostly your iPad may be out of battery following an update. You can very easily fix my iPad won’t turn on the problem in such situation without any issues.

All you need to do is to charge your iPad for around and long press the power button for about 10-15 minutes to turn it on. There are the Chances that the phone might get restarted without any trouble if it issue is due to a drained battery.

2. Failed iOS update: As an iOS user, you must know that not all the updates of iOS are stable. So next time if your iPad won’t turn on even after you have charged, there are chances the new update that you have installed has gone all wrong. There are also chances that you might simply lose all your data during the process.

3. Corrupted Firmware: If you notice that my iPad won’t turn on or get stuck on Apple logo, the clear indications are that its firmware is corrupted. A firmware which is believed to be the base of any OS, since it is solely responsible for the booting up, manipulation of data, and monitoring all the main functions of a device. Mostly, wrong iOS update causes the corrupted firmware. This may also happen if the update has been paused in between.

4. Damaged Storage: There are chances that you may get completely blank screen without any logo. This so happens when primary storage of the device gets compromised. Without the primary storage, cannot load the necessary packages needed to turn the device on.

5. Hardware Problems: During an update, there are also chances that the hardware of your device might get affected. Even though the chances of hardware issue while updating software are very rare, but it does happen! If this happens, then we strictly recommend that you should take your iPad to the nearby Apple Store to rectify the problem.

Following are the different ways for fixing my iPad won’t turn on even when plugged in the issue.

Part 2: Recharge the iPad before turning on

If your iPad does not start after a few seconds of booting, it is possible that the battery is completely drained. In this case, the best solution is to connect the iPad to a charger. It is suggested so because some PCs throw problems while charging iPads. iPads come with an in-built cable and adapter with which you can plug it into a wall outlet.

Your iPad should be turning on right after around 10 or 15 minutes of charging. But it is always suggested to leave it charging for as long as possible as it will only make the functionality better.

charge ipad to turn on ipad

Part 3: Hard Reset iPad to fix iPad won't turn on

You need to hold the Sleep/Wake button on the top right corner of the iPad, at the same time pressing down the Home button in order to reset and restart your device. Keep both the buttons down until the device restarts; this may take around 10-15 seconds. After this, if the red slider pops up over the screen or if the screen reduces, you will need to keep it pressed while waiting for the Apple logo to appear.

hard reset ipad to fix ipad won't turn on

Part 4: Fix iPad won't turn on in recovery mode

If you have already tried the previous solutions but in vain, then you may try to send my iPad won’t turn on even when plugged in, and then restore it to basic or the factory settings. This will erase all your data on the iPad, which can be recovered through the recent backup.

Following is the process to put an iPad into recovery mode. Hold the Home button on your iPad down while plugging the USB cable in. Continue doing this until “Connect to iTunes” pops up on the screen. Release the Home button once the screen appears. Now open iTunes on your computer. A pop-up window will say that iTunes has spotted an iPad in recovery mode. Click on “OK” to restore the iPad to the default factory settings.

fix ipad won't turn on in recovery mode

Part 5: Ultimate solution to fix iPad won't turn on without data loss

When my iPad won’t turn on even when plugged in or the white Apple logo, the most common way to recover your iPad is restoring with iTunes. However, this leads to loss of the certain amount of data. We have brought you a solution to this trouble: dr.fone – Repair is the ultimate solution to fixing the issue without any loss of your data. It can repair any kinds of iOS issues and make your device function normally. Most importantly, you can easily handle it by yourself as it takes less than 10 minutes to repair the issues, that too without any loss of data.

All that you need to do is to get your iPad connected and follow a few simple steps. Working with dr.fone-Repair is truly magical!

dr.fone - Repair

Fix iPad won't turn on without data loss.

  • Only fix your iOS to normal, no data loss at all.
  • Fix various iOS system issues, such as iPhone stuck in recovery mode, white Apple logo, black screen, looping on start, etc.
  • Fixes other iPhone error and iTunes errors, such as iTunes error 4013, iPhone error 14, iTunes error 27, iTunes error 9 and more.
  • Works for all models of iPhone, iPad and iPod touch.
  • Fully compatible with the latest iOS 11.
Available on: Windows Mac
3981454 people have downloaded it

Step 1: Download and install the dr.fone – Repair to fix the issue iPad won’t turn on. After the installation, open dr.fone and select Repair from the main window.

fix ipad won't turn on with dr.fone

Step 2: Using the USB cable, you can connect the iPad to the system. Now, you have to initiate the process by clicking the Start button.

connect ipad to computer

Step 3: You will see the confirmation window to start the download process which includes the iPad generation, model, and version and firmware package. After entering all the details you have to tap the button “Download”.

select ipad firmware

Step 4: Once if the download finished, press “Fix Now” soon a progress bar will appear, and the iPad issue will be fixed within few minutes. It sends a message saying that your iPad is getting back to the normal mode.

fix now

Note: Your iPad fix has done successfully with the dr.fone – Repair. You won’t have a problem with my iPad won’t turn on even when plugged in.

We have recommended you the best solution namely “dr.fone – Repair”. Now you can’t say my iPad won’t turn on. You have the solution right in front of you. All the best!

They're downloading

dr.fone - Repair (iOS)

dr.fone - Repair (iOS)

Fix various iOS system issues like iPhone black screen, White Apple logo, etc. without any data loss.

dr.fone - Recover (iOS)

dr.fone - Recover (iOS)

World's 1st iOS data recovery software to recover data from iPhone, iTunes/iCloud backups.

Product-related questions? Speak directly to our Support Team >>

Hot Articles
Home > How-to > iPhone Issues > Full Solutions to Fix iPad Won't Turn On